|
| No inner shoe | The cutterbar is driven by the angular gearbox directly behind the inner mower drum. This guarantees blockage-free operation on the headland and in awkwardly shaped fields. |
|
| Effective and safe | If the system is suddenly overloaded, the impact is not directed to the spur wheels in the driveline, instead a roll pin in the sprocket drive shaft shears off. The pinion shaft continues spinning, jacking up the cutting disc in question, moving it out of the danger zone and the orbit of the neighbouring discs. As a result, SafeCut prevents damage to the spur gears and neighbouring discs. Replacing the roll pin takes a few minutes and is not very costly. |
|
| EasyCut B 1050 CV BSS | Choose the optional BiG Swath System (BSS) to equip the EasyCut B 1050 CV with large 45 cm diameter auger conveyors- Thanks to the hydraulically telescopic outrigger arms, the overlap to the front mounted mower and the width of the swath can be flexibly adjusted to the prevailing conditions. |
|
| Little time for large volumes | The mower combinations EasyCut B 880 CV/CR Collect and B 1050 CV Collect are equipped with two cross conveyor belts each which safely move the crops to the centre, even large crop volumes typically found in whole crop silage fields. The mower combinations group three passes into one – cutting, conditioning and swathing. |
