Vendro C
New!
Overview
The Vendro C models are equipped with a double-acting and a single-acting control unit as standard. The double-acting control unit is used to fold the machine sequentially from the transport position to the headland position and back again. The single-acting control unit is used to lower the rotor outrigger from the headland position to the working position and lift it back to the headland position. This means that the machine can be folded out of the cabin very conveniently and operating errors are ruled out.
Main Specifications
Features
The trailed models in the Vendro series not only impress with their unique technology, such as the OptiTurn rotor concept which ensures optimum forage quality, but also with their extremely robust design which offers maximum reliability. Thanks to their special design and the many technical features, the machines are also extremely easy to drive and operate.
| Hitch | The C models are hitched via a reversible drawbar for top and bottom hitching and a drawbar eye (40 mm). On request, the drawbar can be fitted with a ball-head hitch 80 or a swinging drawbar for bottom hitching. The Plus models have a two-point headstock. To ensure optimum load equalisation, the two-point headstock is equipped with a tension spring which effectively prevents negative drawbar loads. This enables small and light tractors to be used safely. |
| Hydraulic suspension for the transport axle | In the working position, the transport axle is hydraulically relieved, thereby distributing the weight between the rotor wheels and the hitch. This prevents the transport wheels from rubbing on the sward when cornering tightly, while retaining their function as "guide wheels". |
| Work height control | The Vendro C models feature mechanical working height adjustment as standard. A crank handle can be used to centrally adjust the working height of the tines for the entire working width. This way, you can easily adjust the height to varying conditions. The optional hydraulic working height adjustment can be used to adjust this setting conveniently from the cabin at any time. |
| Electrical operation | If the deflector curtain for limiting edge spreading and/or the hydraulic working height setting option are used, the corresponding hydraulic functions are preselected via an electric operation box. This allows the machine's range of functions to be expanded without increasing the tractor's requirements in terms of the required control units. |
| Do | |
| NOT DELETE | |
| THIS TABLE | |
| IT CREATES CSS THAT IS USED | |
| in the ACF Repeater | |
| JET Engine fields | |
| for the engine specs - Ken | |
| DEF (AdBlue) Capacity |
Photos
